WIP: dovecot 2.4 support

modoboa_installer/scripts/files/dovecot/2.3/conf.d/10-ssl.conf.tpl

@@ -0,0 +1,50 @@
+##
+## SSL settings
+##
+
+# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
+#ssl = yes
+
+# Workarround https://github.com/modoboa/modoboa/issues/2570 
+# We try to load the key and pass if it fails
+# Keys require root permissions, standard commands would be blocked
+# because dovecot can't load these cert
+!include_try /etc/dovecot/conf.d/10-ssl-keys.try
+
+# If key file is password protected, give the password here. Alternatively
+# give it when starting dovecot with -p parameter. Since this file is often
+# world-readable, you may want to place this setting instead to a different
+# root owned 0600 file by using ssl_key_password = <path.
+#ssl_key_password =
+
+# PEM encoded trusted certificate authority. Set this only if you intend to use
+# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
+# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
+#ssl_ca = 
+
+# Require that CRL check succeeds for client certificates.
+#ssl_require_crl = yes
+
+# Request client to send a certificate. If you also want to require it, set
+# auth_ssl_require_client_cert=yes in auth section.
+#ssl_verify_client_cert = no
+
+# Which field from certificate to use for username. commonName and
+# x500UniqueIdentifier are the usual choices. You'll also need to set
+# auth_ssl_username_from_cert=yes.
+#ssl_cert_username_field = commonName
+
+# How often to regenerate the SSL parameters file. Generation is quite CPU
+# intensive operation. The value is in hours, 0 disables regeneration
+# entirely.
+#ssl_parameters_regenerate = 168
+
+# SSL protocols to use
+%ssl_protocol_parameter = %ssl_protocols
+
+
+# SSL ciphers to use
+ssl_cipher_list = EECDH+ECDSA+AESGCM:EECDH+aRSA+AESGCM:EECDH+ECDSA+SHA384:EECDH+ECDSA+SHA256:EECDH+aRSA+SHA384:EECDH+aRSA+SHA256:EECDH+aRSA+RC4:EECDH:EDH+aRSA:!aNULL:!eNULL:!LOW:!3DES:!MD5:!EXP:!PSK:!SRP:!DSS:!RC4
+
+# SSL crypto device to use, for valid values run "openssl engine"
+#ssl_crypto_device =