Initial commit.

modoboa_installer/scripts/files/dovecot/conf.d/10-auth.conf

@@ -0,0 +1,127 @@
+##
+## Authentication processes
+##
+
+# Disable LOGIN command and all other plaintext authentications unless
+# SSL/TLS is used (LOGINDISABLED capability). Note that if the remote IP
+# matches the local IP (ie. you're connecting from the same computer), the
+# connection is considered secure and plaintext authentication is allowed.
+#disable_plaintext_auth = yes
+
+# Authentication cache size (e.g. 10M). 0 means it's disabled. Note that
+# bsdauth, PAM and vpopmail require cache_key to be set for caching to be used.
+#auth_cache_size = 0
+# Time to live for cached data. After TTL expires the cached record is no
+# longer used, *except* if the main database lookup returns internal failure.
+# We also try to handle password changes automatically: If user's previous
+# authentication was successful, but this one wasn't, the cache isn't used.
+# For now this works only with plaintext authentication.
+#auth_cache_ttl = 1 hour
+# TTL for negative hits (user not found, password mismatch).
+# 0 disables caching them completely.
+#auth_cache_negative_ttl = 1 hour
+
+# Space separated list of realms for SASL authentication mechanisms that need
+# them. You can leave it empty if you don't want to support multiple realms.
+# Many clients simply use the first one listed here, so keep the default realm
+# first.
+#auth_realms =
+
+# Default realm/domain to use if none was specified. This is used for both
+# SASL realms and appending @domain to username in plaintext logins.
+#auth_default_realm = 
+
+# List of allowed characters in username. If the user-given username contains
+# a character not listed in here, the login automatically fails. This is just
+# an extra check to make sure user can't exploit any potential quote escaping
+# vulnerabilities with SQL/LDAP databases. If you want to allow all characters,
+# set this value to empty.
+#auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@
+
+# Username character translations before it's looked up from databases. The
+# value contains series of from -> to characters. For example "#@/@" means
+# that '#' and '/' characters are translated to '@'.
+#auth_username_translation =
+
+# Username formatting before it's looked up from databases. You can use
+# the standard variables here, eg. %Lu would lowercase the username, %n would
+# drop away the domain if it was given, or "%n-AT-%d" would change the '@' into
+# "-AT-". This translation is done after auth_username_translation changes.
+#auth_username_format = %Lu
+
+# If you want to allow master users to log in by specifying the master
+# username within the normal username string (ie. not using SASL mechanism's
+# support for it), you can specify the separator character here. The format
+# is then <username><separator><master username>. UW-IMAP uses "*" as the
+# separator, so that could be a good choice.
+#auth_master_user_separator =
+
+# Username to use for users logging in with ANONYMOUS SASL mechanism
+#auth_anonymous_username = anonymous
+
+# Maximum number of dovecot-auth worker processes. They're used to execute
+# blocking passdb and userdb queries (eg. MySQL and PAM). They're
+# automatically created and destroyed as needed.
+#auth_worker_max_count = 30
+
+# Host name to use in GSSAPI principal names. The default is to use the
+# name returned by gethostname(). Use "$ALL" (with quotes) to allow all keytab
+# entries.
+#auth_gssapi_hostname =
+
+# Kerberos keytab to use for the GSSAPI mechanism. Will use the system
+# default (usually /etc/krb5.keytab) if not specified. You may need to change
+# the auth service to run as root to be able to read this file.
+#auth_krb5_keytab = 
+
+# Do NTLM and GSS-SPNEGO authentication using Samba's winbind daemon and
+# ntlm_auth helper. <doc/wiki/Authentication/Mechanisms/Winbind.txt>
+#auth_use_winbind = no
+
+# Path for Samba's ntlm_auth helper binary.
+#auth_winbind_helper_path = /usr/bin/ntlm_auth
+
+# Time to delay before replying to failed authentications.
+#auth_failure_delay = 2 secs
+
+# Require a valid SSL client certificate or the authentication fails.
+#auth_ssl_require_client_cert = no
+
+# Take the username from client's SSL certificate, using 
+# X509_NAME_get_text_by_NID() which returns the subject's DN's
+# CommonName. 
+#auth_ssl_username_from_cert = no
+
+# Space separated list of wanted authentication mechanisms:
+#   plain login digest-md5 cram-md5 ntlm rpa apop anonymous gssapi otp skey
+#   gss-spnego
+# NOTE: See also disable_plaintext_auth setting.
+auth_mechanisms = plain
+
+##
+## Password and user databases
+##
+
+#
+# Password database is used to verify user's password (and nothing more).
+# You can have multiple passdbs and userdbs. This is useful if you want to
+# allow both system users (/etc/passwd) and virtual users to login without
+# duplicating the system users into virtual database.
+#
+# <doc/wiki/PasswordDatabase.txt>
+#
+# User database specifies where mails are located and what user/group IDs
+# own them. For single-UID configuration use "static" userdb.
+#
+# <doc/wiki/UserDatabase.txt>
+
+#!include auth-deny.conf.ext
+#!include auth-master.conf.ext
+
+#!include auth-system.conf.ext
+!include auth-sql.conf.ext
+#!include auth-ldap.conf.ext
+#!include auth-passwdfile.conf.ext
+#!include auth-checkpassword.conf.ext
+#!include auth-vpopmail.conf.ext
+#!include auth-static.conf.ext

modoboa_installer/scripts/files/dovecot/conf.d/10-mail.conf

@@ -0,0 +1,363 @@
+##
+## Mailbox locations and namespaces
+##
+
+# Location for users' mailboxes. The default is empty, which means that Dovecot
+# tries to find the mailboxes automatically. This won't work if the user
+# doesn't yet have any mail, so you should explicitly tell Dovecot the full
+# location.
+#
+# If you're using mbox, giving a path to the INBOX file (eg. /var/mail/%u)
+# isn't enough. You'll also need to tell Dovecot where the other mailboxes are
+# kept. This is called the "root mail directory", and it must be the first
+# path given in the mail_location setting.
+#
+# There are a few special variables you can use, eg.:
+#
+#   %u - username
+#   %n - user part in user@domain, same as %u if there's no domain
+#   %d - domain part in user@domain, empty if there's no domain
+#   %h - home directory
+#
+# See doc/wiki/Variables.txt for full list. Some examples:
+#
+#   mail_location = maildir:~/Maildir
+#   mail_location = mbox:~/mail:INBOX=/var/mail/%u
+#   mail_location = mbox:/var/mail/%d/%1n/%n:INDEX=/var/indexes/%d/%1n/%n
+#
+# <doc/wiki/MailLocation.txt>
+#
+#mail_location = mbox:~/mail:INBOX=/var/mail/%u
+mail_location = maildir:~/Maildir
+
+# If you need to set multiple mailbox locations or want to change default
+# namespace settings, you can do it by defining namespace sections.
+#
+# You can have private, shared and public namespaces. Private namespaces
+# are for user's personal mails. Shared namespaces are for accessing other
+# users' mailboxes that have been shared. Public namespaces are for shared
+# mailboxes that are managed by sysadmin. If you create any shared or public
+# namespaces you'll typically want to enable ACL plugin also, otherwise all
+# users can access all the shared mailboxes, assuming they have permissions
+# on filesystem level to do so.
+namespace inbox {
+  # Namespace type: private, shared or public
+  #type = private
+
+  # Hierarchy separator to use. You should use the same separator for all
+  # namespaces or some clients get confused. '/' is usually a good one.
+  # The default however depends on the underlying mail storage format.
+  #separator = 
+
+  # Prefix required to access this namespace. This needs to be different for
+  # all namespaces. For example "Public/".
+  #prefix = 
+
+  # Physical location of the mailbox. This is in same format as
+  # mail_location, which is also the default for it.
+  #location =
+
+  # There can be only one INBOX, and this setting defines which namespace
+  # has it.
+  inbox = yes
+
+  # If namespace is hidden, it's not advertised to clients via NAMESPACE
+  # extension. You'll most likely also want to set list=no. This is mostly
+  # useful when converting from another server with different namespaces which
+  # you want to deprecate but still keep working. For example you can create
+  # hidden namespaces with prefixes "~/mail/", "~%u/mail/" and "mail/".
+  #hidden = no
+
+  # Show the mailboxes under this namespace with LIST command. This makes the
+  # namespace visible for clients that don't support NAMESPACE extension.
+  # "children" value lists child mailboxes, but hides the namespace prefix.
+  #list = yes
+
+  # Namespace handles its own subscriptions. If set to "no", the parent
+  # namespace handles them (empty prefix should always have this as "yes")
+  #subscriptions = yes
+}
+
+# Example shared namespace configuration
+#namespace {
+  #type = shared
+  #separator = /
+
+  # Mailboxes are visible under "shared/user@domain/"
+  # %%n, %%d and %%u are expanded to the destination user.
+  #prefix = shared/%%u/
+
+  # Mail location for other users' mailboxes. Note that %variables and ~/
+  # expands to the logged in user's data. %%n, %%d, %%u and %%h expand to the
+  # destination user's data.
+  #location = maildir:%%h/Maildir:INDEX=~/Maildir/shared/%%u
+
+  # Use the default namespace for saving subscriptions.
+  #subscriptions = no
+
+  # List the shared/ namespace only if there are visible shared mailboxes.
+  #list = children
+#}
+# Should shared INBOX be visible as "shared/user" or "shared/user/INBOX"?
+#mail_shared_explicit_inbox = yes
+
+# System user and group used to access mails. If you use multiple, userdb
+# can override these by returning uid or gid fields. You can use either numbers
+# or names. <doc/wiki/UserIds.txt>
+#mail_uid =
+#mail_gid =
+
+# Group to enable temporarily for privileged operations. Currently this is
+# used only with INBOX when either its initial creation or dotlocking fails.
+# Typically this is set to "mail" to give access to /var/mail.
+#mail_privileged_group =
+
+# Grant access to these supplementary groups for mail processes. Typically
+# these are used to set up access to shared mailboxes. Note that it may be
+# dangerous to set these if users can create symlinks (e.g. if "mail" group is
+# set here, ln -s /var/mail ~/mail/var could allow a user to delete others'
+# mailboxes, or ln -s /secret/shared/box ~/mail/mybox would allow reading it).
+#mail_access_groups =
+
+# Allow full filesystem access to clients. There's no access checks other than
+# what the operating system does for the active UID/GID. It works with both
+# maildir and mboxes, allowing you to prefix mailboxes names with eg. /path/
+# or ~user/.
+#mail_full_filesystem_access = no
+
+##
+## Mail processes
+##
+
+# Don't use mmap() at all. This is required if you store indexes to shared
+# filesystems (NFS or clustered filesystem).
+#mmap_disable = no
+
+# Rely on O_EXCL to work when creating dotlock files. NFS supports O_EXCL
+# since version 3, so this should be safe to use nowadays by default.
+#dotlock_use_excl = yes
+
+# When to use fsync() or fdatasync() calls:
+#   optimized (default): Whenever necessary to avoid losing important data
+#   always: Useful with e.g. NFS when write()s are delayed
+#   never: Never use it (best performance, but crashes can lose data)
+#mail_fsync = optimized
+
+# Mail storage exists in NFS. Set this to yes to make Dovecot flush NFS caches
+# whenever needed. If you're using only a single mail server this isn't needed.
+#mail_nfs_storage = no
+# Mail index files also exist in NFS. Setting this to yes requires
+# mmap_disable=yes and fsync_disable=no.
+#mail_nfs_index = no
+
+# Locking method for index files. Alternatives are fcntl, flock and dotlock.
+# Dotlocking uses some tricks which may create more disk I/O than other locking
+# methods. NFS users: flock doesn't work, remember to change mmap_disable.
+#lock_method = fcntl
+
+# Directory in which LDA/LMTP temporarily stores incoming mails >128 kB.
+#mail_temp_dir = /tmp
+
+# Valid UID range for users, defaults to 500 and above. This is mostly
+# to make sure that users can't log in as daemons or other system users.
+# Note that denying root logins is hardcoded to dovecot binary and can't
+# be done even if first_valid_uid is set to 0.
+#first_valid_uid = 500
+#last_valid_uid = 0
+
+# Valid GID range for users, defaults to non-root/wheel. Users having
+# non-valid GID as primary group ID aren't allowed to log in. If user
+# belongs to supplementary groups with non-valid GIDs, those groups are
+# not set.
+#first_valid_gid = 1
+#last_valid_gid = 0
+
+# Maximum allowed length for mail keyword name. It's only forced when trying
+# to create new keywords.
+#mail_max_keyword_length = 50
+
+# ':' separated list of directories under which chrooting is allowed for mail
+# processes (ie. /var/mail will allow chrooting to /var/mail/foo/bar too).
+# This setting doesn't affect login_chroot, mail_chroot or auth chroot
+# settings. If this setting is empty, "/./" in home dirs are ignored.
+# WARNING: Never add directories here which local users can modify, that
+# may lead to root exploit. Usually this should be done only if you don't
+# allow shell access for users. <doc/wiki/Chrooting.txt>
+#valid_chroot_dirs = 
+
+# Default chroot directory for mail processes. This can be overridden for
+# specific users in user database by giving /./ in user's home directory
+# (eg. /home/./user chroots into /home). Note that usually there is no real
+# need to do chrooting, Dovecot doesn't allow users to access files outside
+# their mail directory anyway. If your home directories are prefixed with
+# the chroot directory, append "/." to mail_chroot. <doc/wiki/Chrooting.txt>
+#mail_chroot = 
+
+# UNIX socket path to master authentication server to find users.
+# This is used by imap (for shared users) and lda.
+#auth_socket_path = /var/run/dovecot/auth-userdb
+
+# Directory where to look up mail plugins.
+#mail_plugin_dir = /usr/lib/dovecot/modules
+
+# Space separated list of plugins to load for all services. Plugins specific to
+# IMAP, LDA, etc. are added to this list in their own .conf files.
+mail_plugins = quota 
+
+##
+## Mailbox handling optimizations
+##
+
+# The minimum number of mails in a mailbox before updates are done to cache
+# file. This allows optimizing Dovecot's behavior to do less disk writes at
+# the cost of more disk reads.
+#mail_cache_min_mail_count = 0
+
+# When IDLE command is running, mailbox is checked once in a while to see if
+# there are any new mails or other changes. This setting defines the minimum
+# time to wait between those checks. Dovecot can also use dnotify, inotify and
+# kqueue to find out immediately when changes occur.
+#mailbox_idle_check_interval = 30 secs
+
+# Save mails with CR+LF instead of plain LF. This makes sending those mails
+# take less CPU, especially with sendfile() syscall with Linux and FreeBSD.
+# But it also creates a bit more disk I/O which may just make it slower.
+# Also note that if other software reads the mboxes/maildirs, they may handle
+# the extra CRs wrong and cause problems.
+#mail_save_crlf = no
+
+# Max number of mails to keep open and prefetch to memory. This only works with
+# some mailbox formats and/or operating systems.
+#mail_prefetch_count = 0
+
+# How often to scan for stale temporary files and delete them (0 = never).
+# These should exist only after Dovecot dies in the middle of saving mails.
+#mail_temp_scan_interval = 1w
+
+##
+## Maildir-specific settings
+##
+
+# By default LIST command returns all entries in maildir beginning with a dot.
+# Enabling this option makes Dovecot return only entries which are directories.
+# This is done by stat()ing each entry, so it causes more disk I/O.
+# (For systems setting struct dirent->d_type, this check is free and it's
+# done always regardless of this setting)
+#maildir_stat_dirs = no
+
+# When copying a message, do it with hard links whenever possible. This makes
+# the performance much better, and it's unlikely to have any side effects.
+#maildir_copy_with_hardlinks = yes
+
+# Assume Dovecot is the only MUA accessing Maildir: Scan cur/ directory only
+# when its mtime changes unexpectedly or when we can't find the mail otherwise.
+#maildir_very_dirty_syncs = no
+
+# If enabled, Dovecot doesn't use the S=<size> in the Maildir filenames for
+# getting the mail's physical size, except when recalculating Maildir++ quota.
+# This can be useful in systems where a lot of the Maildir filenames have a
+# broken size. The performance hit for enabling this is very small.
+#maildir_broken_filename_sizes = no
+
+##
+## mbox-specific settings
+##
+
+# Which locking methods to use for locking mbox. There are four available:
+#  dotlock: Create <mailbox>.lock file. This is the oldest and most NFS-safe
+#           solution. If you want to use /var/mail/ like directory, the users
+#           will need write access to that directory.
+#  dotlock_try: Same as dotlock, but if it fails because of permissions or
+#               because there isn't enough disk space, just skip it.
+#  fcntl  : Use this if possible. Works with NFS too if lockd is used.
+#  flock  : May not exist in all systems. Doesn't work with NFS.
+#  lockf  : May not exist in all systems. Doesn't work with NFS.
+#
+# You can use multiple locking methods; if you do the order they're declared
+# in is important to avoid deadlocks if other MTAs/MUAs are using multiple
+# locking methods as well. Some operating systems don't allow using some of
+# them simultaneously.
+#mbox_read_locks = fcntl
+#mbox_write_locks = dotlock fcntl
+
+# Maximum time to wait for lock (all of them) before aborting.
+#mbox_lock_timeout = 5 mins
+
+# If dotlock exists but the mailbox isn't modified in any way, override the
+# lock file after this much time.
+#mbox_dotlock_change_timeout = 2 mins
+
+# When mbox changes unexpectedly we have to fully read it to find out what
+# changed. If the mbox is large this can take a long time. Since the change
+# is usually just a newly appended mail, it'd be faster to simply read the
+# new mails. If this setting is enabled, Dovecot does this but still safely
+# fallbacks to re-reading the whole mbox file whenever something in mbox isn't
+# how it's expected to be. The only real downside to this setting is that if
+# some other MUA changes message flags, Dovecot doesn't notice it immediately.
+# Note that a full sync is done with SELECT, EXAMINE, EXPUNGE and CHECK 
+# commands.
+#mbox_dirty_syncs = yes
+
+# Like mbox_dirty_syncs, but don't do full syncs even with SELECT, EXAMINE,
+# EXPUNGE or CHECK commands. If this is set, mbox_dirty_syncs is ignored.
+#mbox_very_dirty_syncs = no
+
+# Delay writing mbox headers until doing a full write sync (EXPUNGE and CHECK
+# commands and when closing the mailbox). This is especially useful for POP3
+# where clients often delete all mails. The downside is that our changes
+# aren't immediately visible to other MUAs.
+#mbox_lazy_writes = yes
+
+# If mbox size is smaller than this (e.g. 100k), don't write index files.
+# If an index file already exists it's still read, just not updated.
+#mbox_min_index_size = 0
+
+# Mail header selection algorithm to use for MD5 POP3 UIDLs when
+# pop3_uidl_format=%m. For backwards compatibility we use apop3d inspired
+# algorithm, but it fails if the first Received: header isn't unique in all
+# mails. An alternative algorithm is "all" that selects all headers.
+#mbox_md5 = apop3d
+
+##
+## mdbox-specific settings
+##
+
+# Maximum dbox file size until it's rotated.
+#mdbox_rotate_size = 2M
+
+# Maximum dbox file age until it's rotated. Typically in days. Day begins
+# from midnight, so 1d = today, 2d = yesterday, etc. 0 = check disabled.
+#mdbox_rotate_interval = 0
+
+# When creating new mdbox files, immediately preallocate their size to
+# mdbox_rotate_size. This setting currently works only in Linux with some
+# filesystems (ext4, xfs).
+#mdbox_preallocate_space = no
+
+##
+## Mail attachments
+##
+
+# sdbox and mdbox support saving mail attachments to external files, which
+# also allows single instance storage for them. Other backends don't support
+# this for now.
+
+# WARNING: This feature hasn't been tested much yet. Use at your own risk.
+
+# Directory root where to store mail attachments. Disabled, if empty.
+#mail_attachment_dir =
+
+# Attachments smaller than this aren't saved externally. It's also possible to
+# write a plugin to disable saving specific attachments externally.
+#mail_attachment_min_size = 128k
+
+# Filesystem backend to use for saving attachments:
+#  posix : No SiS done by Dovecot (but this might help FS's own deduplication)
+#  sis posix : SiS with immediate byte-by-byte comparison during saving
+#  sis-queue posix : SiS with delayed comparison and deduplication
+#mail_attachment_fs = sis posix
+
+# Hash format to use in attachment filenames. You can add any text and
+# variables: %{md4}, %{md5}, %{sha1}, %{sha256}, %{sha512}, %{size}.
+# Variables can be truncated, e.g. %{sha256:80} returns only first 80 bits
+#mail_attachment_hash = %{sha1}

modoboa_installer/scripts/files/dovecot/conf.d/10-master.conf

@@ -0,0 +1,127 @@
+#default_process_limit = 100
+#default_client_limit = 1000
+
+# Default VSZ (virtual memory size) limit for service processes. This is mainly
+# intended to catch and kill processes that leak memory before they eat up
+# everything.
+#default_vsz_limit = 256M
+
+# Login user is internally used by login processes. This is the most untrusted
+# user in Dovecot system. It shouldn't have access to anything at all.
+#default_login_user = dovenull
+
+# Internal user is used by unprivileged processes. It should be separate from
+# login user, so that login processes can't disturb other processes.
+#default_internal_user = dovecot
+
+service imap-login {
+  inet_listener imap {
+    #port = 143
+  }
+  inet_listener imaps {
+    #port = 993
+    #ssl = yes
+  }
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = $default_vsz_limit
+}
+
+service pop3-login {
+  inet_listener pop3 {
+    #port = 110
+  }
+  inet_listener pop3s {
+    #port = 995
+    #ssl = yes
+  }
+}
+
+service lmtp {
+  unix_listener lmtp {
+    #mode = 0666
+  }
+
+  # Create inet listener only if you can't use the above UNIX socket
+  #inet_listener lmtp {
+    # Avoid making LMTP visible for the entire internet
+    #address =
+    #port = 
+  #}
+
+  unix_listener /var/spool/postfix/private/dovecot-lmtp {
+    mode = 0600
+    user = postfix
+    group = postfix
+  }
+}
+
+service imap {
+  # Most of the memory goes to mmap()ing files. You may need to increase this
+  # limit if you have huge mailboxes.
+  #vsz_limit = $default_vsz_limit
+
+  # Max. number of IMAP processes (connections)
+  #process_limit = 1024
+}
+
+service pop3 {
+  # Max. number of POP3 processes (connections)
+  #process_limit = 1024
+}
+
+service auth {
+  # auth_socket_path points to this userdb socket by default. It's typically
+  # used by dovecot-lda, doveadm, possibly imap process, etc. Users that have
+  # full permissions to this socket are able to get a list of all usernames and
+  # get the results of everyone's userdb lookups.
+  #
+  # The default 0666 mode allows anyone to connect to the socket, but the
+  # userdb lookups will succeed only if the userdb returns an "uid" field that
+  # matches the caller process's UID. Also if caller's uid or gid matches the
+  # socket's uid or gid the lookup succeeds. Anything else causes a failure.
+  #
+  # To give the caller full permissions to lookup all users, set the mode to
+  # something else than 0666 and Dovecot lets the kernel enforce the
+  # permissions (e.g. 0777 allows everyone full permissions).
+  unix_listener auth-userdb {
+    #mode = 0666
+    #user = 
+    #group = 
+  }
+
+  # Postfix smtp-auth
+  unix_listener /var/spool/postfix/private/auth {
+    mode = 0666
+    user = postfix
+    group = postfix
+  }
+
+  # Auth process is run as this user.
+  #user = $default_internal_user
+}
+
+service auth-worker {
+  # Auth worker process is run as root by default, so that it can access
+  # /etc/shadow. If this isn't necessary, the user should be changed to
+  # $default_internal_user.
+  #user = root
+}
+
+service dict {
+  # If dict proxy is used, mail processes should have access to its socket.
+  # For example: mode=0660, group=vmail and global mail_access_groups=vmail
+  unix_listener dict {
+    mode = 0600
+    user = vmail
+    #group = 
+  }
+}

modoboa_installer/scripts/files/dovecot/conf.d/10-ssl.conf.tpl

@@ -0,0 +1,50 @@
+##
+## SSL settings
+##
+
+# SSL/TLS support: yes, no, required. <doc/wiki/SSL.txt>
+#ssl = yes
+
+# PEM encoded X.509 SSL/TLS certificate and private key. They're opened before
+# dropping root privileges, so keep the key file unreadable by anyone but
+# root. Included doc/mkcert.sh can be used to easily generate self-signed
+# certificate, just make sure to update the domains in dovecot-openssl.cnf
+ssl_cert = <%tls_cert_file
+ssl_key = <%tls_key_file
+
+# If key file is password protected, give the password here. Alternatively
+# give it when starting dovecot with -p parameter. Since this file is often
+# world-readable, you may want to place this setting instead to a different
+# root owned 0600 file by using ssl_key_password = <path.
+#ssl_key_password =
+
+# PEM encoded trusted certificate authority. Set this only if you intend to use
+# ssl_verify_client_cert=yes. The file should contain the CA certificate(s)
+# followed by the matching CRL(s). (e.g. ssl_ca = </etc/ssl/certs/ca.pem)
+#ssl_ca = 
+
+# Require that CRL check succeeds for client certificates.
+#ssl_require_crl = yes
+
+# Request client to send a certificate. If you also want to require it, set
+# auth_ssl_require_client_cert=yes in auth section.
+#ssl_verify_client_cert = no
+
+# Which field from certificate to use for username. commonName and
+# x500UniqueIdentifier are the usual choices. You'll also need to set
+# auth_ssl_username_from_cert=yes.
+#ssl_cert_username_field = commonName
+
+# How often to regenerate the SSL parameters file. Generation is quite CPU
+# intensive operation. The value is in hours, 0 disables regeneration
+# entirely.
+#ssl_parameters_regenerate = 168
+
+# SSL protocols to use
+#ssl_protocols = !SSLv2
+
+# SSL ciphers to use
+#ssl_cipher_list = ALL:!LOW:!SSLv2:!EXP:!aNULL
+
+# SSL crypto device to use, for valid values run "openssl engine"
+#ssl_crypto_device =

modoboa_installer/scripts/files/dovecot/conf.d/15-mailboxes.conf

@@ -0,0 +1,51 @@
+##
+## Mailbox definitions
+##
+
+# NOTE: Assumes "namespace inbox" has been defined in 10-mail.conf.
+namespace inbox {
+
+  #mailbox name {
+    # auto=create will automatically create this mailbox.
+    # auto=subscribe will both create and subscribe to the mailbox.
+    #auto = no
+
+    # Space separated list of IMAP SPECIAL-USE attributes as specified by
+    # RFC 6154: \All \Archive \Drafts \Flagged \Junk \Sent \Trash
+    #special_use =
+  #}
+
+  # These mailboxes are widely used and could perhaps be created automatically:
+  mailbox Drafts {
+    auto = subscribe
+    special_use = \Drafts
+  }
+  mailbox Junk {
+    auto = subscribe
+    special_use = \Junk
+  }
+  mailbox Trash {
+    auto = subscribe
+    special_use = \Trash
+  }
+
+  # For \Sent mailboxes there are two widely used names. We'll mark both of
+  # them as \Sent. User typically deletes one of them if duplicates are created.
+  mailbox Sent {
+    auto = subscribe
+    special_use = \Sent
+  }
+  # mailbox "Sent Messages" {
+  #   special_use = \Sent
+  # }
+
+  # If you have a virtual "All messages" mailbox:
+  #mailbox virtual/All {
+  #  special_use = \All
+  #}
+
+  # If you have a virtual "Flagged" mailbox:
+  #mailbox virtual/Flagged {
+  #  special_use = \Flagged
+  #}
+}

modoboa_installer/scripts/files/dovecot/conf.d/20-imap.conf

@@ -0,0 +1,58 @@
+##
+## IMAP specific settings
+##
+
+protocol imap {
+  # Maximum IMAP command line length. Some clients generate very long command
+  # lines with huge mailboxes, so you may need to raise this if you get
+  # "Too long argument" or "IMAP command line too large" errors often.
+  #imap_max_line_length = 64k
+
+  # Maximum number of IMAP connections allowed for a user from each IP address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+
+  # Space separated list of plugins to load (default is global mail_plugins).
+  mail_plugins = $mail_plugins imap_quota
+
+  # IMAP logout format string:
+  #  %i - total number of bytes read from client
+  #  %o - total number of bytes sent to client
+  #imap_logout_format = bytes=%i/%o
+
+  # Override the IMAP CAPABILITY response. If the value begins with '+',
+  # add the given capabilities on top of the defaults (e.g. +XFOO XBAR).
+  #imap_capability = 
+
+  # How long to wait between "OK Still here" notifications when client is
+  # IDLEing.
+  #imap_idle_notify_interval = 2 mins
+
+  # ID field names and values to send to clients. Using * as the value makes
+  # Dovecot use the default value. The following fields have default values
+  # currently: name, version, os, os-version, support-url, support-email.
+  #imap_id_send = 
+
+  # ID fields sent by client to log. * means everything.
+  #imap_id_log =
+
+  # Workarounds for various client bugs:
+  #   delay-newmail:
+  #     Send EXISTS/RECENT new mail notifications only when replying to NOOP
+  #     and CHECK commands. Some clients ignore them otherwise, for example OSX
+  #     Mail (<v2.1). Outlook Express breaks more badly though, without this it
+  #     may show user "Message no longer in server" errors. Note that OE6 still
+  #     breaks even with this workaround if synchronization is set to
+  #     "Headers Only".
+  #   tb-extra-mailbox-sep:
+  #     Thunderbird gets somehow confused with LAYOUT=fs (mbox and dbox) and
+  #     adds extra '/' suffixes to mailbox names. This option causes Dovecot to
+  #     ignore the extra '/' instead of treating it as invalid mailbox name.
+  #   tb-lsub-flags:
+  #     Show \Noselect flags for LSUB replies with LAYOUT=fs (e.g. mbox).
+  #     This makes Thunderbird realize they aren't selectable and show them
+  #     greyed out, instead of only later giving "not selectable" popup error.
+  #
+  # The list is space-separated.
+  #imap_client_workarounds = 
+}

modoboa_installer/scripts/files/dovecot/conf.d/20-managesieve.conf

@@ -0,0 +1,73 @@
+##
+## ManageSieve specific settings
+##
+
+# Service definitions
+
+service managesieve-login {
+  #inet_listener sieve {
+  #  port = 4190
+  #}
+
+  #inet_listener sieve_deprecated {
+  #  port = 2000
+  #}
+
+  # Number of connections to handle before starting a new process. Typically
+  # the only useful values are 0 (unlimited) or 1. 1 is more secure, but 0
+  # is faster. <doc/wiki/LoginProcess.txt>
+  #service_count = 1
+
+  # Number of processes to always keep waiting for more connections.
+  #process_min_avail = 0
+
+  # If you set service_count=0, you probably need to grow this.
+  #vsz_limit = 64M
+}
+
+service managesieve {
+  # Max. number of ManageSieve processes (connections)
+  #process_count = 1024
+}
+
+# Service configuration
+
+protocol sieve {
+  # Maximum ManageSieve command line length in bytes. ManageSieve usually does
+  # not involve overly long command lines, so this setting will not normally
+  # need adjustment 
+  #managesieve_max_line_length = 65536
+
+  # Maximum number of ManageSieve connections allowed for a user from each IP
+  # address.
+  # NOTE: The username is compared case-sensitively.
+  #mail_max_userip_connections = 10
+
+  # Space separated list of plugins to load (none known to be useful so far).
+  # Do NOT try to load IMAP plugins here.
+  #mail_plugins =
+
+  # MANAGESIEVE logout format string:
+  #  %i - total number of bytes read from client
+  #  %o - total number of bytes sent to client
+  #managesieve_logout_format = bytes=%i/%o
+
+  # To fool ManageSieve clients that are focused on CMU's timesieved you can
+  # specify the IMPLEMENTATION capability that Dovecot reports to clients.
+  # For example: 'Cyrus timsieved v2.2.13' 
+  #managesieve_implementation_string = Dovecot Pigeonhole
+
+  # Explicitly specify the SIEVE and NOTIFY capability reported by the server
+  # before login. If left unassigned these will be reported dynamically
+  # according to what the Sieve interpreter supports by default (after login
+  # this may differ depending on the user).
+  #managesieve_sieve_capability = 
+  #managesieve_notify_capability = 
+
+  # The maximum number of compile errors that are returned to the client upon
+  # script upload or script verification.	
+  #managesieve_max_compile_errors = 5
+
+  # Refer to 90-sieve.conf for script quota configuration and configuration of 
+  # Sieve execution limits. 
+}

modoboa_installer/scripts/files/dovecot/conf.d/90-quota.conf

@@ -0,0 +1,75 @@
+##
+## Quota configuration.
+##
+
+# Note that you also have to enable quota plugin in mail_plugins setting.
+# <doc/wiki/Quota.txt>
+
+##
+## Quota limits
+##
+
+# Quota limits are set using "quota_rule" parameters. To get per-user quota
+# limits, you can set/override them by returning "quota_rule" extra field
+# from userdb. It's also possible to give mailbox-specific limits, for example
+# to give additional 100 MB when saving to Trash:
+
+plugin {
+  #quota_rule = *:storage=1G
+  #quota_rule2 = Trash:storage=+100M
+}
+
+##
+## Quota warnings
+##
+
+# You can execute a given command when user exceeds a specified quota limit.
+# Each quota root has separate limits. Only the command for the first
+# exceeded limit is excecuted, so put the highest limit first.
+# The commands are executed via script service by connecting to the named
+# UNIX socket (quota-warning below).
+# Note that % needs to be escaped as %%, otherwise "% " expands to empty.
+
+plugin {
+  #quota_warning = storage=95%% quota-warning 95 %u
+  #quota_warning2 = storage=80%% quota-warning 80 %u
+}
+
+# Example quota-warning service. The unix listener's permissions should be
+# set in a way that mail processes can connect to it. Below example assumes
+# that mail processes run as vmail user. If you use mode=0666, all system users
+# can generate quota warnings to anyone.
+#service quota-warning {
+#  executable = script /usr/local/bin/quota-warning.sh
+#  user = dovecot
+#  unix_listener quota-warning {
+#    user = vmail
+#  }
+#}
+
+##
+## Quota backends
+##
+
+# Multiple backends are supported:
+#   dirsize: Find and sum all the files found from mail directory.
+#            Extremely SLOW with Maildir. It'll eat your CPU and disk I/O.
+#   dict: Keep quota stored in dictionary (eg. SQL)
+#   maildir: Maildir++ quota
+#   fs: Read-only support for filesystem quota
+
+plugin {
+  #quota = dirsize:User quota
+  #quota = maildir:User quota
+  quota = dict:User quota::proxy::quota
+  #quota = fs:User quota
+}
+
+# Multiple quota roots are also possible, for example this gives each user
+# their own 100MB quota and one shared 1GB quota within the domain:
+plugin {
+  #quota = dict:user::proxy::quota
+  #quota2 = dict:domain:%d:proxy::quota_domain
+  #quota_rule = *:storage=102400
+  #quota2_rule = *:storage=1048576
+}

modoboa_installer/scripts/files/dovecot/conf.d/90-sieve.conf

@@ -0,0 +1,104 @@
+##
+## Settings for the Sieve interpreter
+## 
+
+# Do not forget to enable the Sieve plugin in 15-lda.conf and 20-lmtp.conf
+# by adding it to the respective mail_plugins= settings.
+
+plugin {
+  # The path to the user's main active script. If ManageSieve is used, this the
+  # location of the symbolic link controlled by ManageSieve.
+  sieve = ~/.dovecot.sieve
+
+  # The default Sieve script when the user has none. This is a path to a global
+  # sieve script file, which gets executed ONLY if user's private Sieve script
+  # doesn't exist. Be sure to pre-compile this script manually using the sievec
+  # command line tool.
+  # --> See sieve_before fore executing scripts before the user's personal
+  #     script.
+  #sieve_default = /var/lib/dovecot/sieve/default.sieve
+
+  # Directory for :personal include scripts for the include extension. This
+  # is also where the ManageSieve service stores the user's scripts.
+  sieve_dir = ~/sieve
+
+  # Directory for :global include scripts for the include extension. 
+  #sieve_global_dir =
+
+  # Path to a script file or a directory containing script files that need to be
+  # executed before the user's script. If the path points to a directory, all
+  # the Sieve scripts contained therein (with the proper .sieve extension) are
+  # executed. The order of execution within a directory is determined by the
+  # file names, using a normal 8bit per-character comparison. Multiple script
+  # file or directory paths can be specified by appending an increasing number.
+  #sieve_before =
+  #sieve_before2 =
+  #sieve_before3 = (etc...)
+
+  # Identical to sieve_before, only the specified scripts are executed after the
+  # user's script (only when keep is still in effect!). Multiple script file or
+  # directory paths can be specified by appending an increasing number.
+  #sieve_after =
+  #sieve_after2 = 
+  #sieve_after2 = (etc...)
+
+  # Which Sieve language extensions are available to users. By default, all 
+  # supported extensions are available, except for deprecated extensions or
+  # those that are still under development. Some system administrators may want
+  # to disable certain Sieve extensions or enable those that are not available
+  # by default. This setting can use '+' and '-' to specify differences relative
+  # to the default. For example `sieve_extensions = +imapflags' will enable the
+	# deprecated imapflags extension in addition to all extensions were already
+  # enabled by default. 
+  #sieve_extensions = +notify +imapflags
+
+  # Which Sieve language extensions are ONLY available in global scripts. This
+  # can be used to restrict the use of certain Sieve extensions to administrator
+  # control, for instance when these extensions can cause security concerns.
+  # This setting has higher precedence than the `sieve_extensions' setting
+  # (above), meaning that the extensions enabled with this setting are never
+  # available to the user's personal script no matter what is specified for the 
+  # `sieve_extensions' setting. The syntax of this setting is similar to the
+  # `sieve_extensions' setting, with the difference that extensions are
+  # enabled or disabled for exclusive use in global scripts. Currently, no
+  # extensions are marked as such by default.
+  #sieve_global_extensions =
+
+  # The Pigeonhole Sieve interpreter can have plugins of its own. Using this
+  # setting, the used plugins can be specified. Check the Dovecot wiki
+  # (wiki2.dovecot.org) or the pigeonhole website
+  # (http://pigeonhole.dovecot.org) for available plugins.
+  #sieve_plugins =
+
+  # The separator that is expected between the :user and :detail 
+  # address parts introduced by the subaddress extension. This may 
+  # also be a sequence of characters (e.g. '--'). The current 
+  # implementation looks for the separator from the left of the 
+  # localpart and uses the first one encountered. The :user part is 
+  # left of the separator and the :detail part is right. This setting
+  # is also used by Dovecot's LMTP service.
+  #recipient_delimiter = +
+
+  # The maximum size of a Sieve script. The compiler will refuse to compile any
+  # script larger than this limit. If set to 0, no limit on the script size is
+  # enforced.
+  #sieve_max_script_size = 1M
+
+  # The maximum number of actions that can be performed during a single script
+  # execution. If set to 0, no limit on the total number of actions is enforced.
+  #sieve_max_actions = 32
+
+  # The maximum number of redirect actions that can be performed during a single
+  # script execution. If set to 0, no redirect actions are allowed.
+  #sieve_max_redirects = 4
+
+  # The maximum number of personal Sieve scripts a single user can have. If set
+  # to 0, no limit on the number of scripts is enforced.
+  # (Currently only relevant for ManageSieve)
+  #sieve_quota_max_scripts = 0
+
+  # The maximum amount of disk storage a single user's scripts may occupy. If
+  # set to 0, no limit on the used amount of disk storage is enforced.
+  # (Currently only relevant for ManageSieve) 
+  #sieve_quota_max_storage = 0
+}

modoboa_installer/scripts/files/dovecot/conf.d/auth-sql.conf.ext

@@ -0,0 +1,30 @@
+# Authentication for SQL users. Included from auth.conf.
+#
+# <doc/wiki/AuthDatabase.SQL.txt>
+
+passdb {
+  driver = sql
+
+  # Path for SQL configuration file, see example-config/dovecot-sql.conf.ext
+  args = /etc/dovecot/dovecot-sql.conf.ext
+}
+
+# "prefetch" user database means that the passdb already provided the
+# needed information and there's no need to do a separate userdb lookup.
+# <doc/wiki/UserDatabase.Prefetch.txt>
+#userdb {
+#  driver = prefetch
+#}
+
+userdb {
+  driver = sql
+  args = /etc/dovecot/dovecot-sql.conf.ext
+}
+
+# If you don't have any user-specific settings, you can avoid the user_query
+# by using userdb static instead of userdb sql, for example:
+# <doc/wiki/UserDatabase.Static.txt>
+#userdb {
+  #driver = static
+  #args = uid=vmail gid=vmail home=/var/vmail/%u
+#}

modoboa_installer/scripts/files/dovecot/dovecot-dict-sql.conf.ext.tpl

@@ -0,0 +1,39 @@
+connect = host=%dbhost dbname=%modoboa_dbname user=%modoboa_dbuser password=%modoboa_dbpassword
+
+# CREATE TABLE quota (
+#   username varchar(100) not null,
+#   bytes bigint not null default 0,
+#   messages integer not null default 0,
+#   primary key (username)
+# );
+
+map {
+  pattern = priv/quota/storage
+  table = admin_quota
+  username_field = username
+  value_field = bytes
+}
+map {
+  pattern = priv/quota/messages
+  table = admin_quota
+  username_field = username
+  value_field = messages
+}
+
+# CREATE TABLE expires (
+#   username varchar(100) not null,
+#   mailbox varchar(255) not null,
+#   expire_stamp integer not null,
+#   primary key (username, mailbox)
+# );
+
+map {
+  pattern = shared/expire/$user/$mailbox
+  table = expires
+  value_field = expire_stamp
+
+  fields {
+    username = $user
+    mailbox = $mailbox
+  }
+}

modoboa_installer/scripts/files/dovecot/dovecot-sql-mysql.conf.ext.tpl

@@ -0,0 +1,140 @@
+# This file is opened as root, so it should be owned by root and mode 0600.
+#
+# http://wiki2.dovecot.org/AuthDatabase/SQL
+#
+# For the sql passdb module, you'll need a database with a table that
+# contains fields for at least the username and password. If you want to
+# use the user@domain syntax, you might want to have a separate domain
+# field as well.
+#
+# If your users all have the same uig/gid, and have predictable home
+# directories, you can use the static userdb module to generate the home
+# dir based on the username and domain. In this case, you won't need fields
+# for home, uid, or gid in the database.
+#
+# If you prefer to use the sql userdb module, you'll want to add fields
+# for home, uid, and gid. Here is an example table:
+#
+# CREATE TABLE users (
+#     username VARCHAR(128) NOT NULL,
+#     domain VARCHAR(128) NOT NULL,
+#     password VARCHAR(64) NOT NULL,
+#     home VARCHAR(255) NOT NULL,
+#     uid INTEGER NOT NULL,
+#     gid INTEGER NOT NULL,
+#     active CHAR(1) DEFAULT 'Y' NOT NULL
+# );
+
+# Database driver: mysql, pgsql, sqlite
+driver = %db_driver
+
+# Database connection string. This is driver-specific setting.
+#
+# HA / round-robin load-balancing is supported by giving multiple host
+# settings, like: host=sql1.host.org host=sql2.host.org
+#
+# pgsql:
+#   For available options, see the PostgreSQL documention for the
+#   PQconnectdb function of libpq.
+#   Use maxconns=n (default 5) to change how many connections Dovecot can
+#   create to pgsql.
+#
+# mysql:
+#   Basic options emulate PostgreSQL option names:
+#     host, port, user, password, dbname
+#
+#   But also adds some new settings:
+#     client_flags        - See MySQL manual
+#     ssl_ca, ssl_ca_path - Set either one or both to enable SSL
+#     ssl_cert, ssl_key   - For sending client-side certificates to server
+#     ssl_cipher          - Set minimum allowed cipher security (default: HIGH)
+#     option_file         - Read options from the given file instead of
+#                           the default my.cnf location
+#     option_group        - Read options from the given group (default: client)
+# 
+#   You can connect to UNIX sockets by using host: host=/var/run/mysql.sock
+#   Note that currently you can't use spaces in parameters.
+#
+# sqlite:
+#   The path to the database file.
+#
+# Examples:
+#   connect = host=192.168.1.1 dbname=users
+#   connect = host=sql.example.com dbname=virtual user=virtual password=blarg
+#   connect = /etc/dovecot/authdb.sqlite
+#
+#connect =
+connect = host=%dbhost dbname=%modoboa_dbname user=%modoboa_dbuser password=%modoboa_dbpassword
+
+# Default password scheme.
+#
+# List of supported schemes is in
+# http://wiki2.dovecot.org/Authentication/PasswordSchemes
+#
+#default_pass_scheme = MD5
+
+# passdb query to retrieve the password. It can return fields:
+#   password - The user's password. This field must be returned.
+#   user - user@domain from the database. Needed with case-insensitive lookups.
+#   username and domain - An alternative way to represent the "user" field.
+#
+# The "user" field is often necessary with case-insensitive lookups to avoid
+# e.g. "name" and "nAme" logins creating two different mail directories. If
+# your user and domain names are in separate fields, you can return "username"
+# and "domain" fields instead of "user".
+#
+# The query can also return other fields which have a special meaning, see
+# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
+#
+# Commonly used available substitutions (see http://wiki2.dovecot.org/Variables
+# for full list):
+#   %%u = entire user@domain
+#   %%n = user part of user@domain
+#   %%d = domain part of user@domain
+# 
+# Note that these can be used only as input to SQL query. If the query outputs
+# any of these substitutions, they're not touched. Otherwise it would be
+# difficult to have eg. usernames containing '%%' characters.
+#
+# Example:
+#   password_query = SELECT userid AS user, pw AS password \
+#     FROM users WHERE userid = '%%u' AND active = 'Y'
+#
+#password_query = \
+#  SELECT username, domain, password \
+#  FROM users WHERE username = '%%n' AND domain = '%%d'
+
+# userdb query to retrieve the user information. It can return fields:
+#   uid - System UID (overrides mail_uid setting)
+#   gid - System GID (overrides mail_gid setting)
+#   home - Home directory
+#   mail - Mail location (overrides mail_location setting)
+#
+# None of these are strictly required. If you use a single UID and GID, and
+# home or mail directory fits to a template string, you could use userdb static
+# instead. For a list of all fields that can be returned, see
+# http://wiki2.dovecot.org/UserDatabase/ExtraFields
+#
+# Examples:
+#   user_query = SELECT home, uid, gid FROM users WHERE userid = '%%u'
+#   user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%%u'
+#   user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%%u'
+#
+#user_query = \
+#  SELECT home, uid, gid \
+#  FROM users WHERE username = '%%n' AND domain = '%%d'
+user_query = SELECT '%{home_dir}/%%d/%%n' AS home, %mailboxes_owner_uid as uid, %mailboxes_owner_gid as gid, CONCAT('*:bytes=', mb.quota, 'M') AS quota_rule FROM admin_mailbox mb INNER JOIN admin_domain dom ON mb.domain_id=dom.id WHERE mb.address='%%n' AND dom.name='%%d'
+
+# If you wish to avoid two SQL lookups (passdb + userdb), you can use
+# userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll
+# also have to return userdb fields in password_query prefixed with "userdb_"
+# string. For example:
+#password_query = \
+#  SELECT userid AS user, password, \
+#    home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \
+#  FROM users WHERE userid = '%%u'
+password_query = SELECT email AS user, password FROM core_user WHERE email='%%u' and is_active=1
+
+# Query to get a list of all usernames.
+#iterate_query = SELECT username AS user FROM users
+iterate_query = SELECT email AS username FROM core_user

modoboa_installer/scripts/files/dovecot/dovecot-sql-postgres.conf.ext.tpl

@@ -0,0 +1,140 @@
+# This file is opened as root, so it should be owned by root and mode 0600.
+#
+# http://wiki2.dovecot.org/AuthDatabase/SQL
+#
+# For the sql passdb module, you'll need a database with a table that
+# contains fields for at least the username and password. If you want to
+# use the user@domain syntax, you might want to have a separate domain
+# field as well.
+#
+# If your users all have the same uig/gid, and have predictable home
+# directories, you can use the static userdb module to generate the home
+# dir based on the username and domain. In this case, you won't need fields
+# for home, uid, or gid in the database.
+#
+# If you prefer to use the sql userdb module, you'll want to add fields
+# for home, uid, and gid. Here is an example table:
+#
+# CREATE TABLE users (
+#     username VARCHAR(128) NOT NULL,
+#     domain VARCHAR(128) NOT NULL,
+#     password VARCHAR(64) NOT NULL,
+#     home VARCHAR(255) NOT NULL,
+#     uid INTEGER NOT NULL,
+#     gid INTEGER NOT NULL,
+#     active CHAR(1) DEFAULT 'Y' NOT NULL
+# );
+
+# Database driver: mysql, pgsql, sqlite
+driver = %db_driver
+
+# Database connection string. This is driver-specific setting.
+#
+# HA / round-robin load-balancing is supported by giving multiple host
+# settings, like: host=sql1.host.org host=sql2.host.org
+#
+# pgsql:
+#   For available options, see the PostgreSQL documention for the
+#   PQconnectdb function of libpq.
+#   Use maxconns=n (default 5) to change how many connections Dovecot can
+#   create to pgsql.
+#
+# mysql:
+#   Basic options emulate PostgreSQL option names:
+#     host, port, user, password, dbname
+#
+#   But also adds some new settings:
+#     client_flags        - See MySQL manual
+#     ssl_ca, ssl_ca_path - Set either one or both to enable SSL
+#     ssl_cert, ssl_key   - For sending client-side certificates to server
+#     ssl_cipher          - Set minimum allowed cipher security (default: HIGH)
+#     option_file         - Read options from the given file instead of
+#                           the default my.cnf location
+#     option_group        - Read options from the given group (default: client)
+# 
+#   You can connect to UNIX sockets by using host: host=/var/run/mysql.sock
+#   Note that currently you can't use spaces in parameters.
+#
+# sqlite:
+#   The path to the database file.
+#
+# Examples:
+#   connect = host=192.168.1.1 dbname=users
+#   connect = host=sql.example.com dbname=virtual user=virtual password=blarg
+#   connect = /etc/dovecot/authdb.sqlite
+#
+#connect =
+connect = host=%dbhost dbname=%modoboa_dbname user=%modoboa_dbuser password=%modoboa_dbpassword
+
+# Default password scheme.
+#
+# List of supported schemes is in
+# http://wiki2.dovecot.org/Authentication/PasswordSchemes
+#
+#default_pass_scheme = MD5
+
+# passdb query to retrieve the password. It can return fields:
+#   password - The user's password. This field must be returned.
+#   user - user@domain from the database. Needed with case-insensitive lookups.
+#   username and domain - An alternative way to represent the "user" field.
+#
+# The "user" field is often necessary with case-insensitive lookups to avoid
+# e.g. "name" and "nAme" logins creating two different mail directories. If
+# your user and domain names are in separate fields, you can return "username"
+# and "domain" fields instead of "user".
+#
+# The query can also return other fields which have a special meaning, see
+# http://wiki2.dovecot.org/PasswordDatabase/ExtraFields
+#
+# Commonly used available substitutions (see http://wiki2.dovecot.org/Variables
+# for full list):
+#   %%u = entire user@domain
+#   %%n = user part of user@domain
+#   %%d = domain part of user@domain
+# 
+# Note that these can be used only as input to SQL query. If the query outputs
+# any of these substitutions, they're not touched. Otherwise it would be
+# difficult to have eg. usernames containing '%%' characters.
+#
+# Example:
+#   password_query = SELECT userid AS user, pw AS password \
+#     FROM users WHERE userid = '%%u' AND active = 'Y'
+#
+#password_query = \
+#  SELECT username, domain, password \
+#  FROM users WHERE username = '%%n' AND domain = '%%d'
+
+# userdb query to retrieve the user information. It can return fields:
+#   uid - System UID (overrides mail_uid setting)
+#   gid - System GID (overrides mail_gid setting)
+#   home - Home directory
+#   mail - Mail location (overrides mail_location setting)
+#
+# None of these are strictly required. If you use a single UID and GID, and
+# home or mail directory fits to a template string, you could use userdb static
+# instead. For a list of all fields that can be returned, see
+# http://wiki2.dovecot.org/UserDatabase/ExtraFields
+#
+# Examples:
+#   user_query = SELECT home, uid, gid FROM users WHERE userid = '%%u'
+#   user_query = SELECT dir AS home, user AS uid, group AS gid FROM users where userid = '%%u'
+#   user_query = SELECT home, 501 AS uid, 501 AS gid FROM users WHERE userid = '%%u'
+#
+#user_query = \
+#  SELECT home, uid, gid \
+#  FROM users WHERE username = '%%n' AND domain = '%%d'
+user_query = SELECT '%{home_dir}/%%d/%%n' AS home, %mailboxes_owner_uid as uid, %mailboxes_owner_gid as gid, '*:bytes=' || mb.quota || 'M' AS quota_rule FROM admin_mailbox mb INNER JOIN admin_domain dom ON mb.domain_id=dom.id WHERE mb.address='%%n' AND dom.name='%%d'
+
+# If you wish to avoid two SQL lookups (passdb + userdb), you can use
+# userdb prefetch instead of userdb sql in dovecot.conf. In that case you'll
+# also have to return userdb fields in password_query prefixed with "userdb_"
+# string. For example:
+#password_query = \
+#  SELECT userid AS user, password, \
+#    home AS userdb_home, uid AS userdb_uid, gid AS userdb_gid \
+#  FROM users WHERE userid = '%%u'
+password_query = SELECT email AS user, password FROM core_user WHERE email='%%u' and is_active
+
+# Query to get a list of all usernames.
+#iterate_query = SELECT username AS user FROM users
+iterate_query = SELECT email AS username FROM core_user

modoboa_installer/scripts/files/dovecot/dovecot.conf.tpl

@@ -0,0 +1,98 @@
+## Dovecot configuration file
+
+# If you're in a hurry, see http://wiki2.dovecot.org/QuickConfiguration
+
+# "doveconf -n" command gives a clean output of the changed settings. Use it
+# instead of copy&pasting files when posting to the Dovecot mailing list.
+
+# '#' character and everything after it is treated as comments. Extra spaces
+# and tabs are ignored. If you want to use either of these explicitly, put the
+# value inside quotes, eg.: key = "# char and trailing whitespace  "
+
+# Default values are shown for each setting, it's not required to uncomment
+# those. These are exceptions to this though: No sections (e.g. namespace {})
+# or plugin settings are added by default, they're listed only as examples.
+# Paths are also just examples with the real defaults being based on configure
+# options. The paths listed here are for configure --prefix=/usr
+# --sysconfdir=/etc --localstatedir=/var
+
+# Enable installed protocols
+!include_try /usr/share/dovecot/protocols.d/*.protocol
+
+# A comma separated list of IPs or hosts where to listen in for connections. 
+# "*" listens in all IPv4 interfaces, "::" listens in all IPv6 interfaces.
+# If you want to specify non-default ports or anything more complex,
+# edit conf.d/master.conf.
+#listen = *, ::
+
+# Base directory where to store runtime data.
+#base_dir = /var/run/dovecot/
+
+# Name of this instance. In multi-instance setup doveadm and other commands
+# can use -i <instance_name> to select which instance is used (an alternative
+# to -c <config_path>). The instance name is also added to Dovecot processes
+# in ps output.
+#instance_name = dovecot
+
+# Greeting message for clients.
+#login_greeting = Dovecot ready.
+
+# Space separated list of trusted network ranges. Connections from these
+# IPs are allowed to override their IP addresses and ports (for logging and
+# for authentication checks). disable_plaintext_auth is also ignored for
+# these networks. Typically you'd specify your IMAP proxy servers here.
+#login_trusted_networks =
+
+# Sepace separated list of login access check sockets (e.g. tcpwrap)
+#login_access_sockets = 
+
+# With proxy_maybe=yes if proxy destination matches any of these IPs, don't do
+# proxying. This isn't necessary normally, but may be useful if the destination
+# IP is e.g. a load balancer's IP.
+#auth_proxy_self =
+
+# Show more verbose process titles (in ps). Currently shows user name and
+# IP address. Useful for seeing who are actually using the IMAP processes
+# (eg. shared mailboxes or if same uid is used for multiple accounts).
+#verbose_proctitle = no
+
+# Should all processes be killed when Dovecot master process shuts down.
+# Setting this to "no" means that Dovecot can be upgraded without
+# forcing existing client connections to close (although that could also be
+# a problem if the upgrade is e.g. because of a security fix).
+#shutdown_clients = yes
+
+# If non-zero, run mail commands via this many connections to doveadm server,
+# instead of running them directly in the same process.
+#doveadm_worker_count = 0
+# UNIX socket or host:port used for connecting to doveadm server
+#doveadm_socket_path = doveadm-server
+
+# Space separated list of environment variables that are preserved on Dovecot
+# startup and passed down to all of its child processes. You can also give
+# key=value pairs to always set specific settings.
+#import_environment = TZ
+
+##
+## Dictionary server settings
+##
+
+# Dictionary can be used to store key=value lists. This is used by several
+# plugins. The dictionary can be accessed either directly or though a
+# dictionary server. The following dict block maps dictionary names to URIs
+# when the server is used. These can then be referenced using URIs in format
+# "proxy::<name>".
+
+dict {
+  quota = %{db_driver}:/etc/dovecot/dovecot-dict-sql.conf.ext
+  #expire = sqlite:/etc/dovecot/dovecot-dict-sql.conf.ext
+}
+
+# Most of the actual configuration gets included below. The filenames are
+# first sorted by their ASCII value and parsed in that order. The 00-prefixes
+# in filenames are intended to make it easier to understand the ordering.
+!include conf.d/*.conf
+
+# A config file can also tried to be included without giving an error if
+# it's not found:
+!include_try local.conf

modoboa_installer/scripts/files/dovecot/fix_modoboa_postgres_schema.sql

@@ -0,0 +1,2 @@
+ALTER TABLE admin_quota ALTER COLUMN bytes SET DEFAULT 0;
+ALTER TABLE admin_quota ALTER COLUMN messages SET DEFAULT 0;

modoboa_installer/scripts/files/dovecot/install_modoboa_postgres_trigger.sql

@@ -0,0 +1,37 @@
+CREATE OR REPLACE FUNCTION merge_quota() RETURNS TRIGGER AS $$
+BEGIN
+  IF NEW.messages < 0 OR NEW.messages IS NULL THEN
+    -- ugly kludge: we came here from this function, really do try to insert
+    IF NEW.messages IS NULL THEN
+      NEW.messages = 0;
+    ELSE
+      NEW.messages = -NEW.messages;
+    END IF;
+    return NEW;
+  END IF;
+
+  LOOP
+    UPDATE admin_quota SET bytes = bytes + NEW.bytes,
+      messages = messages + NEW.messages
+      WHERE username = NEW.username;
+    IF found THEN
+      RETURN NULL;
+    END IF;
+
+    BEGIN
+      IF NEW.messages = 0 THEN
+        RETURN NEW;
+      ELSE
+        NEW.messages = - NEW.messages;
+        return NEW;
+      END IF;
+    EXCEPTION WHEN unique_violation THEN
+      -- someone just inserted the record, update it
+    END;
+  END LOOP;
+END;
+$$ LANGUAGE plpgsql;
+
+DROP TRIGGER IF EXISTS mergequota ON admin_quota;
+CREATE TRIGGER mergequota BEFORE INSERT ON admin_quota
+   FOR EACH ROW EXECUTE PROCEDURE merge_quota();